Custom grip, moldab...
 

Custom grip, moldable plastic  

  RSS

phepler
(@deadeye)
Joined: 1 year ago
Posts: 73
March 21, 2018 15:01  

Here's a custom grip I made from InstaMorph moldable plastic.

I've never been satisfied with my grip on my Benjamin Marauder gen 1. My trigger position and hold left my fingers dangling off the stock. I found this product on Amazon. Basically it is a moldable plastic that comes in bead/pellet form. You heat it up in water to 150º and it sticks together. You kneed and mash it together to mold it to your liking. The consistency is similar to silly putty. Once you get it to the shape you like you let it cool and harden, then you can cut, drill, shave and sand it to finish. I have attached it to my stock with double sided gorilla tape.

IMG 5013
IMG 5012

IMG 5015
IMG 5014


JungleShooter, rofocale2011, Shutik and 1 people thanked
Quote
Topic Tags
gokidd
(@gokidd)
Joined: 1 year ago
Posts: 84
March 21, 2018 15:44  

Clever idea, P-Man! A fella could even put some lead in the center of it to adjust CG of the rifle.
Very cool.

Bob

La Pine, Oregon USA
Sacramento Valley FTC Newsletter


ReplyQuote
EricinMaine
(@ericinmaine)
Joined: 1 year ago
Posts: 53
March 21, 2018 16:05  

phepler,That IS a really great idea.You did a good job of it too.And I like the idea that you attached it in a way that won't harm the gun's original form,if it is removed.

This made me think of this product as a way to extend the length of pull on a rifle Also,to change the cheek piece of a rifle,or build one for lefties shooting with a right handed stock.

EricinMaine-


ReplyQuote
phepler
(@deadeye)
Joined: 1 year ago
Posts: 73
March 22, 2018 06:15  

Another option for a cheek rest mod is this self adhesive foam. Available in different thicknesses and can be stacked to make the height you want. Available at Amazon and maybe your local craft store. 
https://www.amazon.com/gp/product/B07833DF7N/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1


ReplyQuote
marflow
(@marflow)
Joined: 1 year ago
Posts: 523
July 18, 2018 14:39  

will this product sand and paint as needed and what is you work time out of the water

and can you keep it warm by a hot hairdryer

I was thinking of do some buildup on some plastic grips and had forgotten about this product

and will the stuff work with epoxy

that's all just thinking

thanks and take care

mike

Mike


ReplyQuote
phepler
(@deadeye)
Joined: 1 year ago
Posts: 73
July 18, 2018 14:45  

Sandable and paintable.

Maybe 10 minutes of workable time once heated up? 

You can use a hairdryer, but it only seems to heat up the surface and would not work well to make major adjustments. A quick dip back in hot water may work. You can get it right with a few tries.

I would think it would work well with epoxy. It's basically a plastic material with a low melt point.


ReplyQuote
marflow
(@marflow)
Joined: 1 year ago
Posts: 523
July 18, 2018 23:18  

thank you, I guess I need to buy some to test the water

Mike


ClickSmack thanked
ReplyQuote
ClickSmack
(@wickedplinker)
Joined: 10 months ago
Posts: 4
July 19, 2018 05:42  

I want to build up the finger grip diameter on my synthetic bullpup stock. Have been thinking about carefully layering hockey tape and covering it with a sheet of pistol grip tape. Or, layering with fiberglass and resin.

Can't decide. But, this post has me thinking about some other projects. 

Good idea! 


ReplyQuote

  
Working

Please Login or Register