polishing gauntlet ...
 
Notifications

polishing gauntlet pressure chamber  

  RSS

ryanroche
( @ryanroche )
Joined: 2 weeks ago
Posts: 3
2020-02-07 21:46:54  

can anyone direct me to a video on how to properly polish the chamber on my gauntlet?


Quote
Topic Tags
nervoustrigger
( @nervoustrigger )
Joined: 2 years ago
Posts: 218
2020-02-08 05:02:26  

What chamber are you referring to?  Polishing the hammer and the tube in which it rides?


ReplyQuote
ryanroche
( @ryanroche )
Joined: 2 weeks ago
Posts: 3
2020-02-09 09:58:21  

I was talking about the chamber that holds the valve assembly. I thought polishing that would make it seal better with the o-rings .


ReplyQuote
be4meliz
( @be4meliz )
Joined: 2 years ago
Posts: 8
2020-02-16 09:52:36  

@ryanroche- There is only 1 o-ring on the valve assembly that is tensioned by the poppit spring return(the silver piece) the main thing to polish(deburr) would be the screw holes that are for the air block, as they tend to cut the block rings upon removal. I have the .22 & .25 & .22 was rough(cut 3 sets of rings before getting it right) If you want to polish, I would focus on Hammer & tube it rides in. 

 


ReplyQuote
ryanroche
( @ryanroche )
Joined: 2 weeks ago
Posts: 3
2020-02-16 09:57:38  

@be4meliz I have ordered new o ring kit and have deburred the screw holes.  so I hope that is all in need to do . going out shooting this afternoon. thanks for the info.. 


ReplyQuote