Pellet question

There are also different weights. Yours  have a generic head size listed, and no weight. Impossible to say which current H & N might be a match with such limited information.

If I were guessing, I'd get the 5.54mm size from H&N. Never seen a Weihrauch with a .22 bore on the small side. 

Unfortunately, all pellets in the tin may not necessarily match the head size printed on it. A lot will be, but the last ones I bought weren't exactly sorted well.

Superdomes tend to run on the bigger side, try those if you can get ahold of some cheap. WalMart.com used to have them. 

I run H&N 21.14 and H&N FTT 5.5 in my HW90 with satisfactory results. they do have to be seated manually with a pellet seater.

Posted by: Limbshaker

If I were guessing, I'd get the 5.54mm size from H&N. Never seen a Weihrauch with a .22 bore on the small side. 

Unfortunately, all pellets in the tin may not necessarily match the head size printed on it. A lot will be, but the last ones I bought weren't exactly sorted well.

 

Superdomes tend to run on the bigger side, try those if you can get ahold of some cheap. WalMart.com used to have them. 

Chase has spoken wisely, and agree.  H&N 5.4 and the RWS superdome are a good place to start.  And the crossman premiers are usually tight, if you can handle the side effects of using them........

?

Jason G

New to the forum and have mentioned on another thread that I would like to share a "secret".  Go and get yourself a tin of H&N 5.53 5.54 5.55 at least one of each and if your buying from PA and get the free one and add the FTT Green lead free.

Remember its a secret, these are MAGIC PELLETS and I can assure you that at least ONE or more of these will be the MAGIC PELLET for your gun.

CA