Is there anyone who would like to share their complete O-Ring lists for re-sealing the FX Impact (first design) and a FX Monsoon. I would like to buy enough for 3 or 4 re-seal jobs. I'm thinking quantities, size and material specs rather than FX part numbers, so I can order them from a top quality O-Ring manufacturer/warehouse. I'm thinking someone has probably done this before and has the lists.
Thanks
Google it...lotsa places sell kits...
Ernest Rowe had these kits available before. Enough for 3 complete reseals. About $50 as I recall.
Thanks Pluric, but I have that information. What I'm looking for is the O-ring specs, so I can order from a wholesaler/manufacturer.
Maybe I'm cheap, but I don't like spending 100 dollars for two guns-worth of pre-assembled kits from Air gun dealers, to get 15 dollars worth of O-rings.
Thanks Pluric, but I have that information. What I'm looking for is the O-ring specs, so I can order from a wholesaler/manufacturer.
Maybe I'm cheap, but I don't like spending 100 dollars for two guns-worth of pre-assembled kits from Air gun dealers, for 15 dollars worth of O-rings.
If you look at the top list I believe it has the sizes of o-rings posted under the "Description" list. If you message me an email I can scan and send you a better copy.
Rick
another look at a parts diagram monsoon they didn't list the impact
https://www.dropbox.com/s/mz5wdweyr6ijenw/FX-Monsoon.pdf
https://enlacesarmasdeaire.blogspot.com/2012/06/partes-de-armas-de-aire.html
I went ahead and printed out the exploded drawings and parts lists for both guns (the Impact and the separate barrel/shroud drawings were a little harder to find). I guess I will try to figure out how many of each O-Ring is required. I see several mistakes in FX's parts list already, mixed up description numbers, etc, including at least one regarding O-ring material on the pellet pusher seal ring, which should be Urethane and not rubber. There are also "rubber balls" listed that I guess you don't need to replace? Wish I had a simpler way to get the lists. If I figure it out, maybe I will post the lists on the forums for future owner/rebuilders, along with my warehouse sources.
