Fx streamline scopes

On mine I have a Hawke Sidewinder scope. It's the Streamline .25 model.

From the top of the rail to the bottom of the scope tube it's 21mm.

With the large scope it's got a 7mm gap between it and the shroud.

The front of the scope is 64mm.

That leaves a 4mm gap between the bottom of the tube and top of the 10 shot magazine.

Hope that helps.

Is that with medium or high rings ? Also do you know what adapter I need to connect the fill port to my quick connect female on my tank? Tia 

if I had to guess those aren't medium ring yes no  but you could work out the measurements with what has been given

and all medium ring are not the same bottom scope tube height so there could be some trial and error

so what ring are those, it seems you need that height for the mag vs the bell

Ordering the combo Comes with Hawke scope and high rings guess should be fine . Gotta figure out the fill probe and getting it connected to a male quick connect 

Posted by: pepncas

Ordering the combo Comes with Hawke scope and high rings guess should be fine . Gotta figure out the fill probe and getting it connected to a male quick connect 

You need this...

http://www.airgunwarehouseinc.com/py-a-3550.html

I've had great luck with these as well.

https://www.ebay.com/p/FX-Fxgun-Webley-Hatsan-Rws-Prestige-Evanix-PCP-Charging-Filling-Probe/25008760318?iid=123143967568&chn=ps

I wouldn't go much lower than 20mm on the scope ring height 

Thanks bro! Super helpful! They have that fitting gonna include it in the order