FWB65: What is the ...
 
Notifications
Clear all

FWB65: What is the height of the standard front sight shipped on the gun from the factory? A Beeman imported gun

6 Posts
3 Users
1 Likes
705 Views
MP44
(@mp44)
Virginia
Joined: 7 years ago
Posts: 85
Topic starter  

Anyone know?


   
ReplyQuote
marflow
(@marflow)
Washington
Joined: 7 years ago
Posts: 1602
 

installed 4mm 

there were 2 different sets of front sight 

one for the pistol when the sledges are in play

and the set that is used when the sledges are locked out with the plate and screw to cause recoil for training a pistol with recoil but i have never tried 

and the tall sights are just a short 8mm


   
Citizen_K reacted
ReplyQuote
daveshoot
(@daveshoot)
California
Joined: 7 years ago
Posts: 118
 

Sorry, don't have the Beeman version. Here is the FWB version I have, if it helps. Tried to set ruler at top of barrel plane, which should be same, I would guess?

 

IMG 7290
IMG 7291

BTW the caption to the right of the sight means "help Smokey prevent forest fires" in Spanish (Ayuda a Smokey...) and that was not part of my input. You can't always pick your instant backdrops carefully.


   
ReplyQuote
marflow
(@marflow)
Washington
Joined: 7 years ago
Posts: 1602
 

a Beeman version ???????  they had there name stamped on the bottom of the gun in white 

 

so MP44 what are you looking for, your question lacks details 

 


   
ReplyQuote
MP44
(@mp44)
Virginia
Joined: 7 years ago
Posts: 85
Topic starter  
Posted by: @marflow

a Beeman version ???????  they had there name stamped on the bottom of the gun in white 

 

so MP44 what are you looking for, your question lacks details 

 

Beeman imported a lot. They could ask for variations. I was trying to be specific in case Beeman requested front sight insert with a different height on their imported guns than was standard. I would assume it was the same height as the non Beeman marked guns but as I said, I was trying to be specific.


   
ReplyQuote
marflow
(@marflow)
Washington
Joined: 7 years ago
Posts: 1602
 

Beeman did nothing more then put there name on them and were more then likely the only importer 

short one's are 4mm and tall ones are 8mm

go to the Feinwerkbau site and look at parts diagrams and see all of the different width that they offered 

you can buy them on Ebay or the factory, factory is cheaper but shipping could take the fun out of it 

https://www.feinwerkbau.de/en/Service-Download/Exploded-drawings

https://www.ebay.com/sch/m.html?_odkw=&_ssn=nikkonos&item=370811107320&_osacat=0&_from=R40&_trksid=p2046732.m570.l1313&_nkw=65&_sacat=0

the more bits and piece you have the better the value will be on any old air gun 


   
ReplyQuote

Airgun Warriors