A question for our pcp fill savy brethren from an old springer dude --
I have two 4500 psi tanks, big one and a little one, and need to know what connection(s) needed to fill the baby from the mama -
Any help with this will be greatly appreciated.
Thanks in advance,
I can't tell by your photo if the fill hose is removable by a quick release or not. If not then you will need a male to male coupler that will allow you to connect the two hose ends from each tank together. DO NOT use a brass style. Joe Brancato has the good ones. If you scroll down this page you will see one at the bottom.
The other problem might be if you only have one fill hose for the two bottles. I'm assuming they each have a fill hose. If they do have quick disconnects at the end of the fill hose by the bottle then you can just take one off and put the other hose on it like you were filling a probe. Each bottle will need a hose setup to transfer air. Joe has them or you can go cheap on ebay for an extra SCBA fill system.