TX200 trigger sprin...
 

TX200 trigger spring?  

  RSS

doninva
(@doninva)
Joined: 2 years ago
Posts: 129
2018-03-08 20:38:13  

My TX200 trigger has felt "mushy". That is the only way, I know, to explain it. Didn't matter how I adjusted it. I finally realized the tension spring for trigger weight was mangled. I finally was able to extract it from the hole for the adjustment screw. I installed a spring from an ink pin and it works but is a tad light. Anyone know where I can order a replacement. Doesn't have to be OEM.  I'm thinking Mcmaster Carr or another supplier. I could order a OEM from overseas but probably a little pricey. Thanks, Don


Quote
marflow
(@marflow)
Joined: 2 years ago
Posts: 634
2018-03-08 22:53:18  

wire size, length, OD  those facts are needed for the search to begin

and this Chambers part diagram it is part cs265 ???

https://www.gunspares.co.uk/products/24723/TX200-MK3-and-TX200HC-Hunter-Carbine/

happy to look but seeing I don't have that rifle and never seen the spring I need some  spec

mike

Mike


ReplyQuote
willy1
(@willy1)
Joined: 2 years ago
Posts: 34
2018-03-09 04:31:06  

Does,nt anybody take a ball point pin spring and cut it down anymore? i guess to easy?


ReplyQuote
doninva
(@doninva)
Joined: 2 years ago
Posts: 129
2018-03-09 12:58:18  

willy1, read my post. I used a spring from a pin but it is to weak. Thanks, Don


ReplyQuote
doninva
(@doninva)
Joined: 2 years ago
Posts: 129
2018-03-09 13:28:38  

Mike, the length is .250, o.d is .169 and wire diameter is .024. I have looked at Mcmaster carr but no match yet. Don


ReplyQuote
marflow
(@marflow)
Joined: 2 years ago
Posts: 634
2018-03-09 14:30:22  

well the OD is a very odd size, it is not inch or metric so my guess just with that there will be no off the shelf spring and being just .250 in length makes it just that much more difficult  

I would bite the bullet and buy a new one at the best price  you can find or a couple of the, at least that's what I would do

and a spring that short, how did it get damage in the first place would be what I would be looking into

good luck and take care

Mike


ReplyQuote
chardosmith
(@chardosmith)
Joined: 2 years ago
Posts: 37
2018-03-13 09:20:17  

Here is a nice place to order the spring, part CS265

 

https://www.gunspares.co.uk/shopdisplayproducts.asp?page=1&id=24723&Search=

 

 

~original

 

 

-Arnold-


ReplyQuote
K_sqrd
(@k_sqrd)
Joined: 2 years ago
Posts: 19
2018-03-13 12:55:15  

ARH might be able to help you get a spring...

http://www.airrifleheadquarters.com/page/page/251327.htm

 


chardosmith thanked
ReplyQuote

Please Login or Register